5. Replace the three (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
6. Slide the touchpad cable onto its connector on the system board and close the latch to secure the cable.
7. Adhere the adhesive tape, and route the speaker cable on the palm-rest and keyboard assembly.
8. Route the speaker cable, and replace the adhesive tape.
9. Plug the speaker cable to its connector.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Follow the procedure in
after working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
About this task
The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.
Removing and installing components
51
