4. Replace the four screws (M2x4.5) that secures the display hinges to the palm-rest assembly.
5. Slide the display cable into the connector to connect the display cable on to the connector on the system board.
6. Slide the touchscreen cable into the connector to connect the touchscreen cable on to the connector on the system board.
NOTE:
Applicable only on computers with touchscreen configuration.
7. Align and place the display-cable bracket on the display cable.
8. Replace the three screws (M2x3.5) that secure the display-cable bracket to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
after working inside your computer
.
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
4. Remove the
or
fan (integrated graphics card)
About this task
The following image indicates the location of I/O board and provides a visual representation of the removal procedure.
42
Removing and installing components
Summary of Contents for Inspiron 7490 P115G
Page 1: ...Inspiron 7490 Service Manual Regulatory Model P115G Regulatory Type P115G001 ...
Page 49: ...Removing and installing components 49 ...
Page 50: ...50 Removing and installing components ...
Page 53: ...Removing and installing components 53 ...
