Fan
Removing the fan (on computers shipped with discrete
graphics card)
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of fan and provides a visual representation of the removal procedure.
Steps
1. Disconnect the fan cable from the I/O board.
2. Peel the tapes (3) that secure the I/O-board cable to the fan.
3. Peel the tapes (2) that secure the fan to the heat sink and the palm-rest assembly.
4. Remove the three screws (M2x3) that secure the fan to the palm-rest assembly.
5. Slide and lift the fan slightly off the palm-rest assembly.
Removing and installing components
31
Summary of Contents for Inspiron 7490 P115G
Page 1: ...Inspiron 7490 Service Manual Regulatory Model P115G Regulatory Type P115G001 ...
Page 49: ...Removing and installing components 49 ...
Page 50: ...50 Removing and installing components ...
Page 53: ...Removing and installing components 53 ...