Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly.
NOTE:
Push the rubber grommets into the slots if it pops out.
2. Route the speaker cable through the routing guides on the palm-rest assembly.
3. Adhere the tapes that secure the speaker cable to the palm-rest assembly.
4. Connect the speaker cable to the I/O board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
after working inside your computer
.
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of touchpad and provides a visual representation of the removal procedure.
36
Removing and installing components
Summary of Contents for Inspiron 7490 P115G
Page 1: ...Inspiron 7490 Service Manual Regulatory Model P115G Regulatory Type P115G001 ...
Page 49: ...Removing and installing components 49 ...
Page 50: ...50 Removing and installing components ...
Page 53: ...Removing and installing components 53 ...
