10. Adhere the tape that secures the I/O-board cable-latch to the system board.
11. Connect the speaker cable to the system board.
12. Connect the touchpad cable to the system board and close the latch.
13. Connect the keyboard-backlight cable from the system board and close the latch.
14. Connect the keyboard cable to the system board and close the latch.
15. Adhere the Mylar that secures the keyboard-cable latch to the system board.
16. Place the wireless-card bracket on the wireless card.
17. Replace the screw (M2x3) that secures the wireless-card bracket to the palm-rest assembly.
18. Close the right display-hinge.
NOTE:
Ensure that the screw holes on the left display-hinge are aligned with the screw holes on the system board and
palm-rest assembly
19. Replace the screw (M2x5) that secures the right display-hinge to the palm-rest assembly.
20. Replace the screw (M2x3.5) that secures the right display-hinge to the system board and palm-rest assembly.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
. (if applicable)
5. Install the
M.2 2280 solid-state drive/Intel Optane H10
. (if applicable)
6. Install the
.
After working inside your computer
.
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
.
11. Remove the
power-button with fingerprint reader
.
12. Remove the
NOTE:
The system board can be removed along with the heat sink.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
46
Removing and installing components
Summary of Contents for Inspiron 7306 2-in-1
Page 12: ...12 Removing and installing components ...
Page 14: ...Steps 1 Connect the battery cable to the system board 14 Removing and installing components ...
Page 22: ...22 Removing and installing components ...
Page 24: ...24 Removing and installing components ...