Dell Inspiron 3185 Service Manual Download Page 65

Page: 65 / 88

Removing the display hinges

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working

inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Prerequisites

•

Procedure

Prerequisites

1. Remove the

2. Remove the

3. Remove the

4. Remove the

5. Remove the

Procedure

1. Peel the tapes and remove the antenna cables from the routing guides on the display back cover.

Figure 68. Removing the antenna cables

a. antenna cables (2)

b. tape

c. hinge cover (2)

2. Remove the two screws (M2x2.5) and four screws (M2.5x2.5) that secure the display hinges to the display back-cover and

antenna assembly.

3. Lift the display hinges off the display back-cover and antenna assembly.

Removing the display hinges

Summary of Contents for Inspiron 3185

























































































Search results

Summary of Contents for Inspiron 3185

Reviews:

Related manuals for Inspiron 3185

Brands by name

Popular brands

Dell Inspiron 3185, Service Manual

Search results

Summary of Contents for Inspiron 3185

Reviews:

Related manuals for Inspiron 3185

Brands by name

Popular brands