Removing the power and volume-buttons
board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Topics:
•
•
Prerequisites
1. Remove the
.
2. Remove the
.
Procedure
1. Open the latch and disconnect the power and volume-buttons board cable from the I/O board.
2. Peel the tape that secures the power and volume-buttons board to the palm-rest and keyboard assembly.
3. Using a plastic scribe, pry the power and volume-buttons board, along with its cable, off the palm-rest and keyboard
assembly.
Figure 41. Removing the power and volume-buttons board
1. power and volume-buttons board cable
2. latch
3. tape
4. plastic scribe
7
Removing the power and volume-buttons board
17
Summary of Contents for Inspiron 3185
