Dell inspiron 27 7000, Service Manual

Page: 105 / 141

Identifier GUID-B54497E8-5AD5-4FF9-AD4A-F32FDBEDE1E8
Status Released
Removing the system board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
NOTE: Your computer’s Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly
after you replace the system board.
Identifier GUID-FBBF0EEB-05FB-46DE-8B76-119C4EF76D05
Status Released
Prerequisites
1 Remove the back cover .
2 Remove the system-board shield .
3 Remove the memory modules .
4 Remove the solid-state drive .
5 Remove the wireless card .
6 Remove the heat sink .
7 Remove the processor .
105