Replacing the power and volume-
buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Align the screw hole on the power and volume-buttons board with the screw
hole on the palm-rest assembly.
2
Replace the screw (M2x3) that secures the power and volume-buttons board to
the palm-rest assembly.
3
Route the power and volume-buttons board cable through the routing guides on
the palm-rest assembly.
4
Connect the power and volume-buttons board cable to the I/O board.
5
Adhere the tape that secures the power and volume-buttons board cable to the
palm-rest assembly.
Post-requisites
1
Replace the
.
2
Replace the
.
3
Replace the
.
65