Replacing the status-light board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Place the status-light board into the slot on the palm-rest assembly.
2
Adhere the foam that secures the status-light board to the palm-rest assembly.
3
Slide the status-light board cable into the connector on the system board and
close the latch to secure the cable.
4
Route the speaker cable through the routing guides on the palm-rest assembly.
Post-requisites
1
Replace the
.
2
Replace the
.
49