manualshive.com logo in svg

Dell Inspiron 15z, Owner'S Manual, Page: 43 / 94

Share
Download
Dell Inspiron 15z Owner'S Manual Download Page 43

Replacing 

the 

Wireless 

Mini-Card  |  

43

Replacing the Wireless Mini-Card

 

WARNING:  Before working inside your computer, read the safety information 
that shipped with your computer and follow the steps in "Before You Begin" on 
page 7. After working inside your computer, follow the instructions in "After 
Working Inside Your Computer" on page 9. For additional safety best practices 
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

 

CAUTION: To avoid damage to the wireless mini-card, ensure that no cables are 
placed under the wireless mini-card.

1

Align the notch on the wireless mini-card with the tab on the 
system-board connector.

2

Insert the wireless mini-card connector at a 45-degree angle into the 
system-board connector.

3

Press the other end of the wireless mini-card down into the slot on the 
system board and replace the screw that secures the wireless mini-card to the 
system board.

4

Connect the antenna cables to the wireless mini-card

The following table provides the antenna cable color schemes for the 

wireless mini-card supported by your computer.

Connectors on the wireless mini-card

Antenna cable color schemes

WLAN + Bluetooth (2 cables)

Main WLAN + Bluetooth (white triangle)

Auxiliary WLAN + Bluetooth (black triangle)

white

black

OM_Book.book  Page 43  Monday, October 15, 2012  10:01 PM

Summary of Contents for Inspiron 15z































































































Reviews:

No comments