Replacing the touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Slide the touchpad into the slot on the palm rest and keyboard assembly.
2
Align the screw holes on the touchpad with the screw holes on the palm rest and
keyboard assembly.
3
Replace the four screws (M2x2) that secure the touchpad to the palm rest and
keyboard assembly.
4
Adhere the tape that secures the touchpad to the palm rest and keyboard
assembly.
5
Adhere the touchpad cable to the touchpad.
6
Slide the end of the touchpad cable into the connector on the system board and
close the latch to secure the cable.
Post-requisites
1
Replace the
2
Replace the
.
3
Replace the
.
48