background image

Replacing the speakers

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before 

working inside your computer

. After working inside your computer, follow 

the instructions in 

After working inside your computer

. For more safety best 

practices, see the Regulatory Compliance home page a

www.dell.com/

regulatory_compliance

.

 

Procedure

Using the tabs on the speakers, place the speakers in the slots on the palm rest 
and keyboard assembly and snap the speakers into place.

Route the speaker cable through the routing guides on the palm rest and 
keyboard assembly.

Adhere the tape that secures the speaker cable to the palm rest and keyboard 
assembly.

Connect the speaker cable to the system board.

Route the power and volume-buttons board cable through the routing guides on 
the speaker and the palm rest and keyboard assembly.

Connect the power and volume-buttons board cable and the coin-cell battery 
cable to the I/O board.

Post-requisites

Replace the 

battery

.

Replace the 

base cover

.

52

Summary of Contents for Inspiron 15 5000 Series


























































































































Reviews: