Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Adhere the tape that secures the display cable to the display-panel assembly.
2
Route the display cable through the routing guides on the display-panel assembly.
3
Slide the display cable into the connector on the display panel and close the latch
to secure the cable.
4
Adhere the tape on the display-cable connector.
5
Slide the sensor-board cable into the connector on the sensor board and close
the latch to secure the cable.
6
Adhere the tape on the sensor-board connector.
Post-requisites
1
Replace the
.
2
Follow the procedure from step 5 to step 6 in “
”.
3
Replace the
.
4
Replace the
.
5
Replace the
.
89