Dell Inspiron 15 5000 Series, Service Manual

Page: 44 / 121

Replacing the status-light board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Place the status-light board into the slot on the palm rest and keyboard
assembly.
2 Slide the status-light board cable into the connector on the system board and
close the latch to secure the cable.
3 Adhere the foam that secures the status-light board to the palm rest and
keyboard assembly.
Post-requisites
1 Replace the battery .
2 Replace the base cover .
44