Dell Inspiron 14R 5420 Owner'S Manual Download Page 96

Page: 96 / 110

| Removing

the

Processor

Procedure

To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-
socket cam screw counterclockwise until it comes to the cam stop.

CAUTION: To ensure maximum cooling for the processor, do not touch the heat
transfer areas on the processor thermal cooling assembly. The oils in your skin
can reduce the heat transfer capability of the thermal pads.

CAUTION: When removing the processor module, pull the module straight up. Be
careful not to bend the pins on the processor module.

Lift the processor module from the ZIF socket.

processor

ZIF socket

pin-1 corner

ZIF-socket cam screw

book.book Page 96 Wednesday, April 11, 2012 4:13 PM

Summary of Contents for Inspiron 14R 5420















































































































Search results

Summary of Contents for Inspiron 14R 5420

Reviews:

Related manuals for Inspiron 14R 5420

Brands by name

Popular brands

Dell Inspiron 14R 5420, Owner'S Manual

Search results

Summary of Contents for Inspiron 14R 5420

Reviews:

Related manuals for Inspiron 14R 5420

Brands by name

Popular brands