Dell Inspiron 14 - N4050 Owner'S Manual Download Page 42

Page: 42 / 78

Audio Board

Replacing the Audio Board

Follow the instructions in "Before You Begin" on page 9.

Use the alignment posts on the computer base to place the audio board in

place and press the audio board until it clicks into place.

Slide the audio-board cable into the connector on the system board. Press

down on the connector latch to secure the audio-board cable to the

connector on the system board.

Connect the Mini-Card antenna cables to the connectors on the

Mini-Card. See "Replacing the Mini-Card" on page 38.

Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest

Assembly" on page 28.

Replace the battery. See "Replacing the Battery" on page 14.

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

audio-board cable

tab

audio board

Summary of Contents for Inspiron 14 - N4050















































































Search results

Summary of Contents for Inspiron 14 - N4050

Reviews:

Related manuals for Inspiron 14 - N4050

Brands by name

Popular brands

Dell Inspiron 14 - N4050, Owner'S Manual

Search results

Summary of Contents for Inspiron 14 - N4050

Reviews:

Related manuals for Inspiron 14 - N4050

Brands by name

Popular brands