Dell Inspiron 14 5401 Service Manual Download Page 3

Page: 3 / 82

1 Working inside your computer....................................................................................................... 6

2 Removing and installing components............................................................................................. 9

Removing the base cover..............................................................................................................................................12
Installing the base cover................................................................................................................................................ 14

Battery...................................................................................................................................................................................16

Memory module....................................................................................................................................................................19

Removing the memory module.....................................................................................................................................19
Installing the memory module...................................................................................................................................... 20

Solid-state drive—M.2 slot one........................................................................................................................................ 22

Solid-state drive—M.2 slot two........................................................................................................................................26

WLAN card........................................................................................................................................................................... 32

Removing the WLAN card............................................................................................................................................32
Installing the WLAN card.............................................................................................................................................. 32

Fan.........................................................................................................................................................................................34

Removing the fan.......................................................................................................................................................... 34
Installing the system fan............................................................................................................................................... 35

Coin-cell battery.................................................................................................................................................................. 36

Removing the coin-cell battery....................................................................................................................................36
Installing the coin-cell battery...................................................................................................................................... 36

Contents

Summary of Contents for Inspiron 14 5401



















































































Search results

Summary of Contents for Inspiron 14 5401

Reviews:

Related manuals for Inspiron 14 5401

Brands by name

Popular brands

Dell Inspiron 14 5401, Service Manual

Search results

Summary of Contents for Inspiron 14 5401

Reviews:

Related manuals for Inspiron 14 5401

Brands by name

Popular brands