manualshive.com logo in svg

Dell Inspiron 1320, Service Manual, Page: 45 / 45

Share
Download
Dell Inspiron 1320 Service Manual Download Page 45

Back to Contents Page

  

Dell™ Inspiron™ 1320 Service Manual 

 

 

Information in this document is subject to change without notice. 

© 2009 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

 and the 

DELL

 logo are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under 

license; 

Microsoft

, 

Windows, Windows Vista,

 and 

Windows Vista

 start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or 

other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

June 2009 Rev. A00 

Back to Contents Page

 

 

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

CAUTION: 

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Inspiron 1320














































Reviews:

No comments