manualshive.com logo in svg

Dell Inspiron 1320, Service Manual, Page: 16 / 45

Share
Download
Dell Inspiron 1320 Service Manual Download Page 16

Back to Contents Page

  

 

 Processor Heat Sink Assembly  

Dell™ Inspiron™ 1320 Service Manual 

 

  

Removing the Processor Heat Sink Assembly 

 

  

Replacing the Processor Heat Sink Assembly 

 

 

 

 

 

 

 

 

 

Removing the Processor Heat Sink Assembly  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Follow the procedures from 

step 2

 to 

step 18

 in 

Removing the System Board

.  

 

 

  

3.

In sequential order (indicated on the processor heat sink), loosen the four captive screws that secure the processor heat sink assembly to the system 
board.  
 

  

 

 

4.

Lift the processor heat sink assembly off the system board.  
 

 

Replacing the Processor Heat Sink Assembly  

 

 

1.

Place the processor heat sink assembly on the system board.  
 

 

  

2.

Align the four captive screws on the processor heat sink assembly with the screw holes on the system board and tighten the screws in ascending order. 
 
 

 

  

3.

Follow the procedures from 

step 3

 to 

step 17

 in 

Replacing the System Board

.  

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

WARNING: 

If you remove the processor heat sink assembly from the computer when the heat sink is hot, do not touch the metal housing of the 

heat sink. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To help prevent damage to the system board, remove the main battery (see 

Removing the Battery

) before working inside the 

computer.

1 

processor heat sink assembly 

2 

captive screws (4) 

 

NOTE: 

This procedure assumes that you have already removed the processor heat sink assembly and are ready to replace it.

 

NOTE: 

The original thermal pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is 

replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.

 

NOTE: 

This procedure assumes that you have already removed the processor heat sink assembly and are ready to replace it.

Summary of Contents for Inspiron 1320














































Reviews:

No comments