manualshive.com logo in svg

Dell Inspiron 1320, Service Manual, Page: 43 / 45

Share
Download
Dell Inspiron 1320 Service Manual Download Page 43

  

 

 

16.

Remove the four screws that secure the system board to the computer base.  
 

 

  

17.

Lift the system board at an angle toward the side of the computer and out of the computer base.  
 

  

 

 

18.

Turn the system board over.  
 

 

  

19.

Remove the processor heat sink assembly (see 

Removing the Processor Heat Sink Assembly

).  

 

 

  

20.

Remove the processor (see 

Removing the Processor

).  

 

 

Replacing the System Board  

 

 

1.

Replace the processor (see 

Replacing the Processor

).  

 

 

  

2.

Replace the processor heat sink assembly (see 

Replacing the Processor Heat Sink Assembly

).  

 

 

  

3.

Turn the system board over and place it on the computer base.  
 

 

  

4.

Replace the four screws that secure the system board to the computer base.  
 

 

  

5.

Connect the camera cable and the display cable to their respective connectors on the system board.  
 

 

  

6.

Replace the processor fan (see 

Replacing the Processor Fan

).  

 

 

  

7.

Replace the speakers (see 

Replacing the Speakers

).  

 

 

  

8.

Replace the Bluetooth card (see 

Replacing the Bluetooth Card

).  

 

1 

camera cable connector 

2 

display cable connector 

1 

system board 

Summary of Contents for Inspiron 1320














































Reviews:

No comments