Back to Contents Page
Module Cover
Dell™ Inspiron™ 1320 Service Manual
Removing the Module Cover
Replacing the Module Cover
Removing the Module Cover
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the three screws that secure the module cover to the computer base.
4.
Remove the module cover.
Replacing the Module Cover
1.
Align the tabs on the module cover with the computer base and place the module cover in position.
2.
Replace the three screws that secure the module cover to the computer base.
3.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
screws (3)
2
module cover
3
module cover tabs (3)