Dell Inspiron 1320, Setup Manual, Page: 32 / 74

30
Solving Problems
Two beeps — No RAM detected
Remove the memory modules, reinstall •
one module and restart the computer. If
the computer starts normally, reinstall an
additional module. Continue until you have
identified a faulty module or reinstalled all
modules without an error.
If available, install memory modules of the
•
same type in your computer.
If the problem persists, contact Dell (see
•
“Contacting Dell” on page 55).
Three beeps —
Possible motherboard failure -
Chipset error
Contact Dell (see “Contacting Dell” on page 55).
Four beeps
— RAM read/write failure
Ensure that no special memory module/ •
memory connector placement requirements
exist (see the Service Manual on the Dell
Support website at
support.dell.com
).
Verify that the memory modules that you are •
installing are compatible with your computer.
For more information about the type of
memory supported by your computer, see
“Specifications” on page 58.
If the problem persists, contact Dell (see
•
“Contacting Dell” on page 55).
Five beeps
— Real Time Clock failure
Replace the battery.
Six beeps —
Video card or chip failure
Contact Dell (see “Contacting Dell” on page 55).
Seven beeps
— Processor failure
Contact Dell (see “Contacting Dell” on page 55).
Eight beeps —
Display failure
Contact Dell (see “Contacting Dell” on page 55).