Dell Inspiron 1150, Owner'S Manual, Page: 88 / 136

88
Adding and Replacing Parts
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
6
Slide the new drive into the bay until the drive is fully seated.
7
Replace the screw that you removed in step 3.
8
Replace the memory module cover and screw.
Keyboard
1
Complete the instructions in "Before You Begin" on page 77.
2
Use a small flat-blade screwdriver or plastic scribe to lift the notched right edge of the hinge
cover, and pry the cover loose from the hinges and bottom case.
3
Lift the hinge cover up and away from the hinges and bottom case.
4
Remove the four keyboard screws.
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be
careful when removing and handling the keyboard.
5
Lift the keyboard out of the bottom case, and rest it on the display hinges so that the
keyboard connector is exposed.
6
Pull up on the keyboard connector to disconnect it from the interface connector on the
system board.
hinge cover