Dell Inspiron 1110 Installation Manual Download

Page: 4 / 47

Unfold the toner cartridge handle and grasp it. Insert the cartridge into the printer until it snaps into place.

Close the front cover. Make sure that the cover is securely closed. If the cover is not firmly closed, printing errors may occur.

Loading Paper

Load up to 150 sheets of plain paper in the paper tray.

To load paper:

Open the paper input tray. Pull on the length and width guides to extend the tray.

Flex the sheets back and forth to loosen them, and then fan them out. Do not fold or crease the print media. Align the edges on a level surface.

Load the paper stack in the paper tray

with the side to be printed on facing up

NOTE:

When printing text at 5% coverage, you can expect a toner cartridge life of approximately 1,000 pages for the starter toner

cartridge that is shipped with the printer (2,000 pages for a standard toner cartridge).

NOTE:

To print a document, set the paper type and size in your software application after loading paper into the paper tray. See

"Paper Tab"

Summary of Contents for Inspiron 1110
















































Search results

Summary of Contents for Inspiron 1110

Reviews:

Related manuals for Inspiron 1110

Brands by name

Popular brands

Dell Inspiron 1110, Installation Manual

Search results

Summary of Contents for Inspiron 1110

Reviews:

Related manuals for Inspiron 1110

Brands by name

Popular brands