manualshive.com logo in svg

Dell GX240 - OptiPlex Pentium 4 1.8GHz 512MB 40GB CD Win2K, User Manual, Page: 271 / 298

Share
Download
Dell GX240 - OptiPlex Pentium 4 1.8GHz 512MB 40GB CD Win2K User Manual Download Page 271

Microsof t® Windows® XP Features

19

The firewall is configured using the 

Properties

 dialog box associated with 

each Internet connection in the Control Panel. The firewall can be enabled 
or disabled. Additional configuration options are available for more 
advanced users. These advanced options include the ability to open or close 
specific Transmission Control Protocol (TCP) or User Datagram Protocol 
(UDP) ports or to enable port redirection. Port redirection allows access 
requests to a specific port on the firewall (such as port 80, the Web server 
port) to be automatically redirected to another computer on the local 
network. This capability allows a Web server on a home network to be 
protected by an edge firewall.

Summary of Contents for GX240 - OptiPlex Pentium 4 1.8GHz 512MB 40GB CD Win2K











































































































































































































































































































Reviews:

No comments