Dell G15 5515 Service Manual Download Page 40 | Manualshive

Page: 40 / 73

background image

Steps

1. Remove the two (M2x4) screws that secure the Type-C bracket to the system board and lift the Type-C bracket off the

system board.

2. Peel the tape that secures the display cable to the system board.
3. Open the latch and disconnect the display cable from the system board and place it on a flat and clean surface.
4. Open the latch and disconnect the power-adapter port cable from the system board.
5. Disconnect the left fan cable from the system board.
6. Open the latch and disconnect the I/O-board cable from the system board.
7. Disconnect the speaker cable from the system board.
8. Open the latch and disconnect the keyboard cable from the system board.
9. Open the latch and disconnect the keyboard-backlight cable from the system board.
10. Open the latch and disconnect the touchpad cable from the system board.
11. Open the latch and disconnect the 4 zone keyboard cable from the system board (optional).
12. Disconnect the right fan cable from the system board.
13. Open the latch and disconnect the power-button cable from the USB board.

CAUTION:

Before removing the system board, give sufficient time for the heat sink to cool down to avoid

injury.

14. Remove the (M2x2) screw that secures the left fan to the to the palm-rest and keyboard assembly.
15. Remove the five (M2x4) screws that secure the system board to the palm-rest and keyboard assembly.

NOTE:

USB board, and heat sink are attached to the system board.

40

Removing and installing components

«
...
38
39
40
41
42
...
»

Summary of Contents for G15 5515










































































Reviews:

No comments

Related manuals for G15 5515

Brand: Gateway Pages: 1

Brand: Kensington Pages: 4

Brand: Gateway Pages: 168

HOT WHEELS ACCELERATOR

Brand: Oregon Scientific Pages: 28

TravelMate P645-M

Brand: Acer Pages: 85

TravelMate C210 Series

Brand: Acer Pages: 97

TravelMate P243-MG

Brand: Acer Pages: 84

TravelMate B113-M

Brand: Acer Pages: 217

TravelMate P278-M

Brand: Acer Pages: 74

TravelMate C310 Series

Brand: Acer Pages: 69

Brand: Dell Pages: 132

Inspiron 17 7000 Series

Brand: Dell Pages: 132

Inspiron 17 5000 Series

Brand: Dell Pages: 114

Brand: Acer Pages: 79

6010GZ - Celeron M 1.4 GHz

Brand: Gateway Pages: 138

Brand: Hama Pages: 4

VAIO VGN-Z890FJB

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands