Dell G15 5515, Service Manual

Page: 52 / 73

Steps
1. Place the power button on the slot on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x2) that secure the power button to the palm-rest and keyboard assembly.
3. Align the screw holes on the power-button shield with the screw holes on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x2) that secure the power-button shield to the palm-rest and keyboard assembly.
Next steps
1. Install the system board .
2. Install the memory module .
3. Install the wireless card .
4. Install the solid-state drive 2 .
5. Install the solid-state drive 1 .
6. Install the rear cover
7. Install the battery .
8. Install the base cover .
9. Follow the procedure in After working inside your computer .
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the touchpad .
5. Remove the rear cover .
6. Remove the display assembly .
7. Remove the solid-state drive .
8. Remove the solid-state drive 2 .
52 Removing and installing components