Access the Console Ports
|
30
To access the USB-B console port, follow these steps:
Step
Task
1
Power on the PC (Dell Force 10 recommends using an XP operating system).
2
Connect the USB-A end of cable (included) into an available USB port on the PC.
3
Connect the USB-B end of cable into the USB-B console port on the S60 system.
4
Power on the S60 system.
5
Install the necessary USB device drivers (an internet connection is required). For assistance, contact Dell
Networking Technical Support.
6
Open your terminal software emulation program to access the S60 system.
7
Set the terminal connection settings as follows:
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control
8
The CLI command prompt appears when you are connected to the S60 system.
