44
Installing System Components
Recommended Tools
You may need the following items to perform the procedures in this section:
•
Key to the system keylock
•
#2 Phillips screwdriver
•
T10 Torx driver
•
Small flat-blade screwdriver
•
Wrist grounding strap
Inside the System
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your
Product Information Guide
for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
In Figure 3-1, the bezel, system cover, and cooling shrouds are removed to provide an interior view of the
system.
NOTICE:
Do not remove the cooling shrouds if the system is turned on. The cooling shrouds must be installed to
direct the airflow from the fans.
Summary of Contents for EMU01
