Figure 37. Installing the expansion card riser 2
NOTE:
TESLA T4 is used for illustrative purposes only.
Next steps
1.
Install expansion card riser 1
.
2. Follow the procedure listed in
After working inside your system
.
Removing an expansion card
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
3.
Remove the expansion card riser
.
Steps
1. Using a Phillips #2 screwdriver, remove the screw that secures the expansion card to the riser.
2. Holding the expansion card by its edges, remove it from the riser slots.
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
Installing and removing system components
39
