Steps
1. Insert the hook on the air shroud into the slot on the chassis.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
2. Lower the air shroud until the blue clip locks in place.
Figure 28. Installing the air shroud
Next steps
Follow the procedure listed in
After working inside your system
.
Support bracket
Removing the support bracket
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
Steps
1. Using the Phillips #1 screwdriver, remove the screws that secure the support bracket to the chassis.
30
Installing and removing system components
