Dell EMC XC Core XC650, Installation And Service Manual

Page: 100 / 136

Figure 89. Removing the VGA port
3. If the VGA module is not going to be replaced, install a filler bracket and close the card retention latch.
Figure 90. Installing the filler bracket
Next steps
1. Replace the rear VGA module or install the riser blank .
Installing the rear VGA port
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions .
2. Follow the procedure listed in Before working inside your system .
3. Remove expansion card riser 3 .
Steps
1. If installed, remove the filler bracket from the expansion card riser (Riser 3).
100 Installing and removing system components