●
8 x 2.5-inch hot-swappable NVMe drives.
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the
Dell Express Flash NVMe PCIe
SSD User's Guide
Browse all Products
>
Data Center Infrastructure
>
Storage
Adapters & Controllers
>
Dell PowerEdge Express Flash NVMe PCIe SSD
>
Documentation
>
Manuals and
Documents
.
Ports and connectors specifications
USB ports specifications
Table 13. USB specifications
Front
Rear
USB port type
No. of ports
USB port type
No. of ports
USB 2.0-compliant port
One
USB 3.0-compliant port
One
Micro-USB 2.0 compliant
port
One
USB 2.0-compliant port
One
NOTE:
The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
NOTE:
The USB 2.0 specifications provide a 5 V supply on a single wire to power connected USB devices. A unit load is
defined as 100 mA in USB 2.0, and 150 mA in USB 3.0. A device may draw a maximum of 5 unit loads (500 mA) from a port
in USB 2.0; 6 (900 mA) in USB 3.0.
NOTE:
The USB 2.0 interface can provide power to low-power peripherals but must adhere to USB specification. An
external power source is required for higher-power peripherals to function, such as external CD/DVD Drives.
NIC port specifications
The system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on the LAN on
Motherboard (LOM) and integrated on the optional OCP cards.
Table 14. NIC port specification for the system
Feature
Specifications
LOM card
1 GB x 2
OCP card (OCP 3.0)
1
VGA ports specifications
The system supports One DB-15 VGA port one each on the front and back panels.
Video specifications
The system supports integrated Matrox G200 graphics controller with 16 MB of video frame buffer.
Table 15. Supported front video resolution options for the system
Resolution
Refresh rate (Hz)
Color depth (bits)
1024 x 768
60
8, 16, 32
1280 x 800
60
8, 16, 32
Technical specifications
13
