Next steps
1. If applicable,
.
2. Follow the procedure listed in
After working inside your system
on page 26.
Removing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in the
on page 25.
2. Follow the procedure listed in the
Before working inside your system
3.
.
4.
Remove the M.2 BOSS card from the M.2 BOSS riser
.
Steps
1. Using the Phillips #1 screwdriver, remove the screws securing the M.2 SSD module to the BOSS card.
2. Pull the M.2 SSD module to disconnect from the connector on the M.2 BOSS card.
Figure 105. Removing the M.2 SSD module
Next steps
1. If applicable,
Install the M.2 BOSS card into the M.2 BOSS riser
.
2. If applicable,
.
Installing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in the
on page 25.
2. Follow the procedure listed in
Before working inside your system
3.
.
4.
Remove the M.2 BOSS card from the M.2 BOSS riser
.
Steps
1. Align the M.2 SSD module at angle with the connector on the M.2 BOSS card.
2. Insert the M.2 SSD module until it is firmly seated in M.2 BOSS card connector.
Installing and removing system components
103
