•
Up to 4 x 3.5 inch drives with hard drive adapter, internal, hot swappable SAS, SATA, or Nearline SAS drives
•
Up to 8 x 2.5 inch drives or 10 x 2.5 inch drives with hard drive adapter, internal, hot swappable SAS, SATA, or Nearline SAS drives
•
Up to 4 x 3.5 inch drives or 8 x 2.5 inch drives or 10 x 2.5 inch drives with hard drive adapter, internal, hot swappable SATA SSDs
Ports and connectors specifications
USB ports
The following table provides more information about the USB specifications:
Table 19. USB specifications
Front panel
Back panel
Internal USB
•
One USB 2.0-compliant port
•
One iDRAC Direct (Micro-AB USB)
port
•
Two USB 3.0-compliant port
•
One internal USB 3.0 port
NIC ports
The PowerEdge R440 system supports two Network Interface Controller (NIC) ports on the back panel, which have two 1 Gbps
configuration.
NOTE:
You can install up to five PCIe add-on NIC cards.
Serial connector
The serial connector connects a serial device to the system. The PowerEdge R440 system supports one serial connector on the back
panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R440 system supports two 15-
pin VGA ports on the front and back panels.
Internal Dual SD Module
The PowerEdge R440 system supports two optional flash memory card slots with an internal dual MicroSD module.
NOTE:
One card slot is dedicated for redundancy.
Video specifications
The PowerEdge R440 system supports Matrox G200eR2 graphics card with 16 MB capacity.
Technical specifications
27
