Figure 23. Installing a rear fan module
Power supply units
Removing a power supply unit
Prerequisites
CAUTION:
At least two power supply units (PSUs) must be installed for the enclosure to function properly.
1
Follow the safety guidelines listed in
Safety instructions
.
2
Disconnect the power cable from the power connector associated to the PSU you intend to remove.
Steps
1
Press the orange release button to open the PSU release lever.
2
Hold the release lever, pull the PSU out of the enclosure.
CAUTION:
Ensure that you install a PSU blank if you are removing a PSU permanently.
36
Installing and removing system components