11. Memory module sockets for processor 1
12. OCP 3.0 card retention latch
13. Expansion card riser 2 (R2)
Rear view of the sled
Figure 2. Rear view of the sled
Table 1. Rear view of the sled
Item
Ports, panels, or slots
Icon
Description
1
PCIe expansion card riser 1
(R1a or R1b)
N/A
Enables you to connect PCI Express expansion cards.
2
Sled release handle
N/A
Enables you to remove the sled from the enclosure.
3
PCIe expansion card riser 2
(R2)
N/A
Enables you to connect PCI Express expansion cards.
4
Sled release lock
N/A
Enables you to remove the sled from the enclosure.
5
OCP 3.0
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
6
System identification LED
The System Identification(ID) LED is available on the back of the
system. Press the system ID button on the front of the enclosure to
identify a system in a rack.
7
iDRAC Direct port (Micro-AB
USB)
Enables you to remotely access iDRAC. For more information, see
the iDRAC User’s Guide at
.
8
Sled power button
N/A
Enables you to power on the sled while accessing it from the rear.
9
Mini-DisplayPort
Enables you to connect a display device to the system.
10
iDRAC or NIC or RJ45 port
The NIC ports that are integrated on the system board provide
network connectivity. These NIC ports can also be shared with
iDRAC when iDRAC network settings is set to shared mode.
or
Enables you to remotely access iDRAC. For more information, see
the iDRAC User’s Guide at
.
11
USB 3.0 port
This port is USB 3.0-compliant.
12
Information tag
N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If
you have opted for the secure default access to iDRAC, then the
Information tag will also contain the iDRAC secure default password.
8
Dell EMC PowerEdge C6520 system overview
