Next steps
1.
Install the expansion card riser
.
2. Follow the procedure listed in
after working inside your system
.
Removing the riser card
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
3.
Remove the expansion card riser
.
4. If installed,
.
5. If applicable, disconnect the cable from the riser card.
Steps
1. Using a Phillips #2 screwdriver, remove the screws that secure the riser card to the expansion card riser.
2. Remove the riser card from the expansion card riser.
NOTE:
The procedure to remove the riser 1B card is similar to removing the riser 1A card.
Figure 50. Removing the riser card from riser 1
46
Installing and removing system components
