Figure 43. Polling
Accelerometer sensor setup
Prerequisites
Windows standard APIs: FromIdAsync(String), GetCurrentReading(), GetDefault(), and GetDeviceSelector(Guid interfaceId) are
used for accessing the sensor. For details, go to
https://docs.microsoft.com/en-us/uwp/api/windows.devices.sensors.custom?
.
About this task
The ADXL345 accelerometer sensor is connected to I2C bus 2 of the EGW-3200. This sensor is detected as a accelerometer
sensor and follows Windows sensor framework.
See the
Humidity and temperature sensor setup
on page 33 section for the following tasks:
●
●
●
●
Run the accelerometer sensor application
Steps
1.
Choose accelerometer
: Click the
Standard
type of accelerometer.
Setting Up the Windows 10 Operating System
45
