Optional expansion modules
The EGW-3200 supports several expansion modules, in mini PCI express (mPCIe), M.2, and I2C formats. The required Windows
software package is already installed in the Windows image for the following modules. Refer to the website of the manufacturer
for more details.
Table 4. Optional expansion modules
S No.
Format
Interface details
Reference link
1
mPCIe
EMUC-B202 (Isolated Canbus)
https://www.innodisk.com/en/products/embedded-peripheral/
communication/emuc-b202
2
mPCIe
EMPL-G2P1 (Isolated GbE with
PoE out)
https://www.innodisk.com/en/products/embedded-peripheral/
communication/empl-g2p1
3
mPCIe
EMP2-X4S2 (Isolated RS-422
and RS-485)
https://www.innodisk.com/en/products/embedded-peripheral/
communication/emp2-x4s2
4
mPCIe
EMP2-X2S1 (Isolated RS-232)
https://www.innodisk.com/en/products/embedded-peripheral/
communication/emp2-x2s1
5
mPCIe
EMPL-G202 (Isolated GbE LAN)
https://www.innodisk.com/en/products/embedded-peripheral/
communication/empl-g202
6
M.2 2230
Intel WiFi AX210
https://ark.intel.com/content/www/us/en/ark/products/
204836/intel-wifi-6e-ax210-gig.html
7
M.2 3042
Sierra EM7565 (4G)
https://www.sierrawireless.com/iot-solutions/products/em7565/
8
M.2 3042
Thales MV31-W (5G)
9
Internal I2C
wafer
ADLINK 55-49071 (Isolated
DI/O)
N/A
Configure WWAN network
Prerequisites
Follow the procedures in the service manual to install and configure the WWAN module and the corresponding carrier USIM card
for the system.
About this task
After the WWAN module and the SIM cards are installed, perform the following steps.
Steps
1. Click the
Start
icon.
2. Type Settings and click the
Settings
app.
3. Select
Network & Internet
.
4. Locate the WWAN connection in the
WiFi
section and select the entry to connect and disconnect from the WWAN adapter.
Configure Bluetooth
Steps
1. Click the
Start
icon.
2. Type Settings and click
Settings
.
3. Select
Devices
from the
Settings
menu, then select
Bluetooth
from the menu on the left panel.
14
Setting Up the Windows 10 Operating System
