6.
Secure a crossover network cable between Ethernet port two on the Edge Gateway and the configured Ethernet port on the
computer.
7.
On the Windows computer, launch Remote Desktop Connection.
8.
Connect to the Edge Gateway using the IP address
192.168.2.1
. The default username and password are both
admin
.
Ubuntu Core 16
Boot up and log in – Remote system configuration
1.
Connect a network cable from Ethernet port one on the Edge Gateway to a DHCP-enabled network or router that provides IP
addresses.
2.
In your network's DHCP server, use the command
dhcp-lease-list
to obtain the IP address associated with the Edge
Gateway's MAC address.
3.
Setup as SSH session using an SSH terminal emulator (for example, native command-line ssh client on Linux or PuTTY on Windows).
NOTE: The SSH service is enabled on Ubuntu Core 16 by default.
4.
Enter the command
ssh admin@
<IP address>
, followed by the default user name and password. The default user name and
password are both
admin
.
For example;
lo@lo-Latitude-E7470:~$ ssh [email protected]
[email protected]'s password:
Boot up and log in – Static IP system configuration
This allows you to connect your Edge Gateway through a host computer, which must be on the same subnet.
NOTE: The static IP address of Ethernet port two on the Edge Gateway is set to these values at the factory:
•
IP address:
192.168.2.1
•
Subnet mask:
255.255.255.0
•
DHCP server: Not applicable
1.
On the host computer, configure the Ethernet adaptor that is connected to the Edge Gateway with a static IPv4 address under the
same subnet. Set the IPv4 address to
192.168.2.x
(where
x
represents the last digit of the IP address, for example,
192.168.2.2
).
NOTE: Do not set the IPv4 address to the same IP address as the Edge Gateway. Use an IP address between
192.168.2.2
to
192.168.2.254
.
2.
Set the subnet mask to
255.255.255.0
.
Default BIOS settings
General (BIOS level 1)
Table 22. General (BIOS level 1)
BIOS level 2
BIOS level 3
Item
Default value
System Information
System Information
BIOS Version
Not applicable
Service Tag
Not applicable
Asset Tag
Not applicable
Ownership Tag
Not applicable
Manufacturing Date
Not applicable
Ownership Date
Not applicable
Express Service Code
Not applicable
Memory Information
Memory Installed
Not applicable
69
