manualshive.com logo in svg

Dell Edge 5000 Series, Installation And Operation Manual

Share
Download
Dell Edge 5000 Series Installation And Operation Manual Download Page 11

System—Top

Features

1

Mobile broadband antenna port (port one)

Connect an antenna to increase the range and strength of the 
mobile broadband signals.

2

Micro-SIM card slot

Insert a micro-SIM card to connect to a mobile broadband 
network.

3

Mobile broadband antenna port (port two)

Connect an antenna to increase the range and strength of the 
mobile broadband signals.

4

Wi-Fi antenna port (port three)

Connect an antenna to increase the range and strength of Wi-Fi 
signals.

5

Intrusion detection connector

Connect an intrusion detection switch to detect any intrusion 
into the system.

6

Wi-Fi antenna port (port four)

Connect an antenna to increase the range and strength of Wi-Fi 
signals.

7

HDMI port

Connect a monitor or other HDMI device. Provides video and 
audio output. Hot-plugging is supported on Windows 10 and 
Ubuntu only.

8

USB 2.0 port

Connect a USB 2.0 device.

9

USB 2.0 port

Connect a USB 2.0 device.

Intrusion-detection connector mapping

Pin

Signal

1

GND

2

Intrusion detection

3

Cable detection

11

Summary of Contents for Edge 5000 Series






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands