Dell EC280 Owner'S Manual Download Page 15

Page: 15 / 77

Setting Up and Using Your Computer

Setting Up a Printer (USB type)

NOTICE:

Complete the operating system setup before you connect a printer to the computer.

See the documentation that came with the printer for setup information, including how to:

• Obtain and install updated drivers
• Connect the printer to the computer
• Load paper and install the toner or ink cartridge

For technical assistance, refer to the printer owner's manual or contact the printer manufacturer.

Printer Cable

Your printer connects to your computer with a USB cable. Your printer may not come with a printer

cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you

purchased a printer cable at the same time you purchased your computer, the cable may arrive in the

computer box.

Connecting a USB Printer

NOTE:

You can connect USB devices while the computer is turned on.

Complete the operating system setup, if you have not already done so.

Attach the USB printer cable to the USB connectors on the computer and the printer. The USB

connectors only fit into the ports when correctly oriented.

1 USB connector on computer 2 USB printer cable

3 USB connector on printer

Summary of Contents for EC280














































































Search results

Summary of Contents for EC280

Reviews:

Related manuals for EC280

Brands by name

Popular brands

Dell EC280, Owner'S Manual

Search results

Summary of Contents for EC280

Reviews:

Related manuals for EC280

Brands by name

Popular brands