Dell E70S, Installation And Service Manual

Page: 214 / 238

Figure 220. Removing the BOSS S2 module blank
To install the BOSS blank:
1. Align the blank with the BOSS S2 module bay and push it into the bay until it clicks into place.
Figure 221. Installing the BOSS S2 module blank
To install the BOSS S2 module:
1. Install the BOSS S2 module . To install the BOSS S2 , see installing the BOSS S2 module steps 1 to 5.
2. Install the M.2 SSD. To install the M.2 SSD, see installing the BOSS S2 module steps 6 to 10.
NOTE: Installing the BOSS S2 card carrier does not require the system to be powered off. System shutdown is only
required when installing the BOSS S2 controller card module.
To remove the BOSS S2 controller card module:
1. Power off the system and remove the system cover .
2. Remove the M.2 SSD. To remove the M.2 SSD, see removing the BOSS S2 module steps 1 to 4.
214 Upgrade Kits