1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Disconnect the power cables from the power supply unit (PSU) to the system board and hard drives.
Steps
Remove the screw securing the PSU to the chassis, slide the PSU toward the front of the chassis and
lift it out of the chassis.
Figure 31. Removing and installing a cabled power supply unit
1.
screw
2. PSU
3. P2 cable connector
4. P1 cable connector
5. standoff
6. P3 cable connector
Next steps
1.
Install the cabled PSU.
2.
Follow the procedure listed in the After working inside your system section.
Related Links
Before working inside your system
After working inside your system
Installing a cabled power supply unit
Safety instructions
89
