Dell Dimension 4550 Series Owner'S Manual Download Page 96

Page: 96 / 152

Adding Parts

www

.dell.com | support.dell.com

Card Installation

To add or replace the card, gently press it down into the slot connector

until it clicks into place.

Release the card clip lever, ensuring that the tab on the card clip lever

fits into the notch on the front end of the card.

Secure the card by lowering the hinged lever on the back panel.

If you disconnected a power cable from the card in step 1 of the

previous procedure, reconnect the cable to the card.

Close the computer cover (see page 104).

NOTICE:

To connect a network cable, first plug the cable into the network

wall jack and then plug it into the computer.

Connect your computer and devices to electrical outlets, and turn

them on.

card clip
lever

AGP card

card clip

slot connector

Summary of Contents for Dimension 4550 Series

























































































































































Search results

Summary of Contents for Dimension 4550 Series

Reviews:

Related manuals for Dimension 4550 Series

Brands by name

Popular brands

Dell Dimension 4550 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4550 Series

Reviews:

Related manuals for Dimension 4550 Series

Brands by name

Popular brands