Dell Dimension 4550 Series Owner'S Manual Download

Page: 89 / 152

Adding Parts

NOTICE:

Do not route card cables over or behind the cards. Cables routed

over the cards can prevent the computer cover from closing properly or cause
damage to the equipment.

Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s

cable connections.

NOTICE:

To connect a network cable, first plug the cable into the network

wall jack and then plug it into the computer.

Close the computer cover (see page 104), reconnect the computer and

devices to electrical outlets, and turn them on.

Install any drivers required for the card as described in the card

documentation.

filler

bracket

alignment bar

alignment guide

card retention arm

Summary of Contents for Dimension 4550 Series

























































































































































Search results

Summary of Contents for Dimension 4550 Series

Reviews:

Related manuals for Dimension 4550 Series

Brands by name

Popular brands

Dell Dimension 4550 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4550 Series

Reviews:

Related manuals for Dimension 4550 Series

Brands by name

Popular brands