Dell Dimension 4550 Series Owner'S Manual Download Page 73

Page: 73 / 152

Advanced Troubleshooting

If you are reinstalling Windows XP Professional, you may be prompted

to provide further network information regarding your network

configuration, such as the domain name or workgroup name. If you are

unsure of your settings, accept the default selections.
Windows XP installs the operating system components, configures the

computer, and then restarts the computer.

Completing the Operating System Setup

NOTICE:

When the computer restarts, you will see the following message:

Press any key to boot from the CD

Do not

press any key when this

message appears.

When the

Welcome to Microsoft

screen appears, click

Next

When the

How will this computer connect to the

Internet?

message appears, click

Skip

When the

Ready to register with Microsoft?

screen appears, select

No,

not at this time

and click

Next

When the

Who will use this computer?

screen appears, you can enter

up to five users.

Click

Next

Click

Finish

to complete the setup and remove the CD from the drive.

Reinstalling Drivers and Software

Reinstall the appropriate drivers (see page 66).

Reinstall your virus protection software. See the documentation that

came with the software for instructions.

Reinstall your other software programs. See the documentation that

came with the software for instructions.

Summary of Contents for Dimension 4550 Series

























































































































































Search results

Summary of Contents for Dimension 4550 Series

Reviews:

Related manuals for Dimension 4550 Series

Brands by name

Popular brands

Dell Dimension 4550 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4550 Series

Reviews:

Related manuals for Dimension 4550 Series

Brands by name

Popular brands