Dell DC, 3 User Manual Download Page 180

Page: 180 / 254

178

PERC 3 BIOS Configuration Utility

.co

ll.c

If space remains in the arrays, the next logical drive to be configured

appears.

Repeat steps 3 to 21 to create an array and configure another logical

drive.
If all array space is used, a list of the existing logical drives appears.

Press any key to continue.

Respond to the

Save

prompt.

Initialize the logical drives you have just configured.

Initializing Logical Drives

Initialize each new logical drive you configure. You can initialize the logical
drives using:

•

Batch Initialization.

The

Initialize

option on the

Management Menu

lets you initialize up to eight logical drives simultaneously.

•

Individual Initialization.

The

Objects—

Logical Drive

action menu

for an individual logical drive has an

Initialize

option.

Batch Initialization

To initialize logical drives using the batch initialization procedure:

Choose

Initialize

from the BIOS Configuration Utility

Management

Menu

A list of the current logical drives appears.

Press the spacebar to select the desired logical drives for initialization

or press <F2> to select/deselect all logical drives.

After you select the logical drives to initialize, press <F10>.

Select

Yes

from the confirmation prompt.

The progress of the initialization for each drive displays in bar graph

format.

When initialization is complete, press any key to continue.

Press <Esc> to display the

Management Menu

Summary of Contents for DC, 3































































































































































































































































Search results

Summary of Contents for DC, 3

Reviews:

Related manuals for DC, 3

Brands by name

Popular brands

Dell DC, 3, User Manual

Search results

Summary of Contents for DC, 3

Reviews:

Related manuals for DC, 3

Brands by name

Popular brands